ProBreeze PB-F03 Mode D'emploi page 5

Press the mode button
Normal Mode:
Allows the user to manually adjust to either high, medium or low speed settings.
Each time the fan is turned on it will start in normal mode.
Nature Mode:
Designed to replicate natural and varying wind speeds:
With fan speed set to LOW: The fan will spend 5 seconds at LOW power and 5
seconds off and repeat.
With fan speed set to MID: The fan will spend 5 seconds each at MID, LOW, MID,
STOP, LOW, MID, LOW, STOP and repeat.
With fan speed set to HIGH: The fan will spend 5 seconds each at MID, LOW,
HIGH, MID, HIGH, LOW, HIGH, STOP and repeat.
Sleep Mode:
This was designed to use the effects of Nature Mode to fall asleep. It will gradually
decrease the speed of the fan in 30 minute increments:
With fan speed set to LOW: The fan will run the same as LOW Nature Mode
With fan speed set to MID: The fan will spend 30 minutes at MID Nature Mode
then switch to LOW
With fan speed set to HIGH: The fan will spend 30 minutes at HIGH, 30-mins at
MID and then switch to LOW.
Tip: If you would prefer a constant fan speed whilst sleeping, we recommend
setting the fan to NORMAL mode and selecting speed as LOW. Use the timer
function to set the fan to switch off after an elapsed time (e.g. 1 hour after going to
bed).
to select one of three types of breeze:
English | 4