Introduction; Explanation Of Symbols - VOLTCRAFT 1893209 Notice D'emploi

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
To ensure that the product remains in this state and to guarantee safe operation, always follow these operating
instructions.
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Do not give this product to a third party without the operating instructions. Therefore, retain these
operating instructions for reference!
If there are any technical questions, please contact:
International: www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The lightning symbol inside of a triangle is used when there is a potential risk of personal injury, such as
electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in these oper-
ating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This symbol indicates that this product is built according to protection class II. It is equipped with reinforced
or dual insulation between the mains circuit and the output voltage.
The product must only be installed and used in dry, indoor locations. It must not become damp or wet, as
this may cause a fatal electric shock!
This symbol reminds you to read the operating instructions included with the product.
This symbol indicates the protection class of the product. The product is completely protected against dust
ingress and spray water from all directions.
3