Safety Distances; Fuel Load Sizes And Thermal Output - HASE Valencia Mode D'emploi

3.

Safety Distances

A distance of 1 cm is to be maintained between the furnace
and the back wall, a distance of 2 cm is to be maintained
between the ceiling and the furnace
(* in Switzerland 5 cm each, Fig. 1).
The following safety distances are to be maintained to
infl ammable respectively heat sensitive materials (for example
furniture, wood or plastic panelling, curtains etc.):
Within the radiation range of the glass pane (Fig. 1):
120 cm in front and 30 cm next to the furnace.
In the area of the fl ue tube connection (on the wall resp. the
ceiling): A radius of 20 cm around the fl ue tube.
WARNING!
Flammable fl ooring materials (e.g., wood,
laminate, carpeting,) must be protected with a
fl oorplate made of non-combustible material
(e.g., tiles, safety glass, slate, or sheet steel).
The size of the fl oorplate must be larger than
the base of the stove by at least 50 cm in front
and at least 11 cm at the sides of the stove
(Fig. 2).
32
*
30
120
Fig. 1
Abb. 1
*
11
50
min. 108
Fig. 2
4.

Fuel Load Sizes and Thermal Output

The thermal output depends on the amount of fuel you put in
the stove. When adding more fuel, please do not exceed the
maximum fuel load size of 2.5 kg. Exceeding the maximum
fuel load size leads to a danger of overheating, which can
result in damage to the stove and the risk of a stove fi re.
NOTE!
To attain a thermal output of approx. 8 kWm,
burn wood logs that weigh 1.9 kg and are no
longer than 33 cm in length for about 45 min.
NOTE!
To attain a thermal output of approx. 4 kWm,
Dimensions in cm
burn wood logs that weigh 0.7 kg and are no
longer than 25 cm in length for about 35 min.
Angaben in cm.
The Valencia is intended for intermittent operation, please
11
only apply one fuel layer at a time.
fl oorplate
Angaben in cm.
Dimensions in cm