Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16
Milling protection disc (2x)
17
Milling protection housing (2x)
19
Jackleg / Working depth regulator (1x)
22
Gear selector lever (1x)
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packag-
ing and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. When complaints the dealer must be in-
formed immediately. Subsequent complaints will not
be accepted.
• If possible, store the packaging until the warranty peri-
od has expired.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and year
of construction of the device in your orders.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
4. Intended use
The machine is designed for digging over beds and
fields. Be sure to observe the restrictions in the additional
safety instructions.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a case
of misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind result-
ing from such misuse.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equiv-
alent purposes.
5. Safety instructions
General safety rules
Understand your machine.
Read and understand the operator's manual and labels
affixed to the machine. Learn its application and limita-
tions as well as the specific potential hazards peculiar
to it. Be thoroughly familiar with the controls and their
proper operation. Know how to stop the machine and dis-
engage the controls quickly.
24
GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Make sure to read and understand all the instructions and
safety precautions as outlined in the Engine Manufac-
turer's Manual, packed separately with your unit. Do not
attempt to operate the machine until you fully understand
how to properly operate and maintain the Engine and
how to avoid accidental injuries and/or property damage.
Safety at work area
Never start or run the engine inside a closed area. The
exhaust fumes are dangerous, containing carbon mon-
oxide, an odorless and deadly gas.
Operate this unit only in a well ventilated outdoor area.
Never operate the machine without good visibility or light.
Never operate the machine on a steep slope.
Always work transversally, not up and down.
Personal safety
1
Do not operate the machine while under the influ-
ence of drugs, alcohol, or any medication that could
affect your ability to use it properly.
2
Dress properly. Wear heavy long pants, boots and
gloves. Do not wear loose clothing, short pants, and
jewelry of any kind. Secure long hair so it is above
shoulder level. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
3
Use safety equipment. Always wear eye protection.
4
Safety equipment such as a dust mask, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
5
Check your machine before starting it. Keep guards
in place and in working order. Make sure all nuts,
bolts, etc. are securely tightened.
6
Never operate the machine when it is in need of re-
pair or is in poor mechanical condition.
7
Replace damaged, missing or failed parts before us-
ing it. Check for fuel leaks. Keep the machine in safe
working condition.
8
Never tamper with safety device. Check their proper
operation regularly.
9
Do not use the machine if the engine's switch does
not turn it on or off. Any gasoline powered machine
that can not be controlled with the engine switch is
dangerous and must be replaced.
10 Form a habit of checking to see that keys and ad-
justing wrenches are removed from machine area
before starting it. A wrench or a key that is left at-
tached to a rotating part of the machine may result in
personal injury.
11 Stay alert, watch what you are doing and use com-
mon sense when operating the machine.
12 Do not overreach. Do not operate the machine while
barefoot or when wearing sandals or similar light-
weight footwear. Wear protective footwear that will
protect your feet and improve your footing on slip-
pery surfaces.
13 Keep proper footing and balance at all times. This
enables better control of the machine in unexpected
situations.
Publicité
Table des Matières
