Baratza Vario Guide De Démarrage Rapide page 3

Vario ♦ Vario W ♦ Forté-AP ♦ Forté-BG
Step 1. Inside the box you will find two separate boxes. The larger of the two contains
the grinder and the PortaHolder (if applicable). The other contains the hopper,
lid, grounds bin, burr removal tool, and calibration tool.
Step 2. Remove the grinder from the box by lifting the plastic bag and pulling straight
up.
IMPORTANT! For grinders with scales, the weight platform (scale) is fragile,
and can be damaged by excess weight or force. Be gentle. Do NOT press down
on it.
Step 3. With the hopper lid in place, mount the hopper on the grinder by lining up the
two small tabs at the base of the hopper with the two slots inside the collar.
Turn the hopper clockwise until it locks into position (expect to apply force).
Step 4. Plug in the grinder. Add beans, insert the grounds bin. Adjust the Macro and
Micro setting for the preferred brewing method. Macro grind adjustments
should be made while the unit is running. See Table below for suggested set-
tings.
Steel
Ceramic
Note that these are just starting points; you will need to dial in the grind to your prefer-
ence. For additional information on grind settings and brewing methods go to the sup-
port tab at www.baratza.com. (* May require recalibration).
Step 5. To operate the grinder, do the following:
◊ For the Vario, chose a preset number and press Start.
◊ For the Vario-W, press the Tare button, chose a preset number and press
Start.
◊ For the Forté press Weight, then press Tare, choose a preset number, and
press Start or, when grinding by time, chose a preset number and press
Start.
Step 6. To set a programmable Time/Weight button (1,2,3), use up/down arrows to
adjust to preferred time/weight, then press and hold desired button until the
display flashes. You have now stored the new time/weight.
If you think that your grinder is not performing correctly, please go to our on-
line troubleshooting located at www.baratza.com/troubleshooting
Questions or need support:
◊ In US and Canada, contact support@baratza.com or call 425-641-1245
◊ For all other countries, to find a retailer near you go to http://www.baratza.
com/retailers/international
For detailed grinder information read the Operations Manual found at www.
baratza.com/support/manuals
Espresso Dripper
Brewers V60
* 4M 3Z
#1-3 6M 6M
Full Immersion
Chemex AeroPress
70 3N
10L 5N
English
Siphon French Press
4N 8M
6M 10Z