Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MODE 1
Individual Office or Open Plan Office (set for Individual Office at delivery)
To use this function, the movement sensor must be active (Mode 2 ON)!
Individual office (Mode 1 OFF): After the completion of the after-glow period (factory setting 15 mins)
the luminaire switches itself off. The afterglow is the period between the last movement detected and the
luminaire switching itself off.
Set Individual Office with remote control:
0000
1
Open Plan Office (Mode 1 ON): After the completion of the after-glow period (factory setting 15 mins) the
luminaire dims itself to 20% lighting level for 2 hours then turns itself off. This ensures a basic brightness
and thus orientation in a space. Recommended for open-plan offices without lightdim connect (swarm
function).
Set for open plan office with remote control:
0000
1
MODE 2
MOVEMENT SENSOR (activated at delivery)
Movement Sensor active (Mode 2 ON): The luminaire turns itself on/off depending on movement.
Activate Movement Sensor with remote control:
0000
2
The setting of the afterglow, see Afterglow
Movement Sensor deactivated (Mode 2 OFF): The luminaire must be manually switched on and off via the
switch.
Deactivate Movement Sensor with remote control:
0000
2
MODE 3
Constant Light Regulator (activated at delivery)
Constant Light Regulator active (Mode 3 ON): The luminaire dims itself depending on the ambient light level
to the Stored Light Value (see Mode 5)
Activate Constant Light Regulator with remote control:
0000
3
Constant Light Regulator inactive (Mode 3 OFF): The luminaire can be dimmed only.
Deactivate Constant Light Regulator with remote control:
0000
3
4
Publicité
Table des Matières
