GCE EASE II Mode D'emploi page 15

Check body condition
Check label condition
Check the three recap screws are in place
Check patient port condition
Check exhalation valve flap condition
Check inhalation plate (with pin) condition
Check inhalation valve flap condition
LEAK CHECKS
Hose to hose fitting joints (use leak
detection fluid)
Hose to demand valve body joint (use
leak detection fluid)
Leak test Demand valve (listening for
leak with patient port and inhalation disc
removed)
OPERATION CHECKS
Test button operation
Tested By:
APPENDIX:
Nr 2: Quick coupling features and connecting / disconnecting procedure.
MANUFACTURER:
GCE, s.r.o.
Zizkova 381
583 01 Chotebor
Czech Republic
TICK
TICK
Tel: +420 569 661 111
Fax: +420 569 661 602
http://www.gcegroup.com
© GCE, s.r.o.
15/88
Comments / Action Taken
Comments / Action Taken
Date:
EN