Installing And Connecting The Refrigerator - Waeco CoolMatic CR50 Notice D'utilisation

CoolMatic
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
A
NOTICE!
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account
of this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
 The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
Observe all the other installation instructions in this section.
7.2 Installing the refrigerator
A
NOTICE!
 Fasten the device as described in the operating manual to
prevent hazards.
 Keep objects clear of openings in the housing or mounting
structure (such as ventilation slots).
 The refrigerator is only suitable for installation in a fitted niche.
Once it is installed, only the front of the appliance may be
accessible.
I
NOTE
In the case of integrated refrigerators, please remove the locking
mechanism at the top and bottom. You can contact the Dometic
WAECO branch in your country for more information (addresses
on the back of the operating manual).
EN

Installing and connecting the refrigerator

41