Control Elements; Installing And Connecting The Refrigerator - Waeco CoolMatic Serie Notice D'utilisation

_cr-kuehlschraenke.book Seite 39 Montag, 6. April 2009 1:03 13
COOLMATIC CR Series
No. in illustration Explanation
1
2
3
4
5
6
6.2

Control elements

No. in
fig. 6, page 5
1
2
3
4
7 Installing and connecting the
refrigerator
Safety instructions for installation on boats
a
Please note the following instructions for installation on boats:
– The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
– Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
– The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
– If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
– Observe all the other installation instructions in this section.

Installing and connecting the refrigerator

Freezer compartment
Wire shelf (folding, so that bottles can be put in the fridge)
Fruit compartment
Shelf
Bottle restraint (to hold bottles in the door)
Compartment with lid (hinged)
Explanation
Temperature controller
Green LED: operation
Red LED: fault
Interior lighting
39