Pentair Kreepy Krauly Lil shark 6-lang Guide D'installation page 4

STEP 1 : Preparation of the Pool
Overview
A. Before operation of 'Lil Shark™ Aboveground Pool Cleaner, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
B. Start Pump.
STEP 2 : Check Parts
Make sure you all parts to use your pool cleaner
STEP 3 : Assemble Cleaner
A. Attach hose sections as shown in Fig. 1.
B. Insert swivel assembly into top of cleaner body
and twist 1/4 turn clockwise to lock. See Fig. 2.
C. Attach hose assembly to cleaner swivel assembly.
Fig. 1.
Male Hose End
STEP 4 : Submerge Cleaner
Turn cleaner upside down, submerge, and feed
cleaner and hose down side of the pool wall to fill
hose with water. See Fig. 3.
G-INSB-LILSHARK (REV 01/2015)
Female Hose End
PREPARATION OF THE POOL
Reducer
Cone
Hose
Swivel
Assembly
Fig. 2.
Fig. 3.
Swivel
Assembly
Flow
Vacuum
Regulator
Director
4