Trebs Comfortheat 99360 Mode D'emploi page 11

supplied through an external switching device such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
26. When not in use, let the pad cool down before folding. Fold neatly but not tightly (or roll) without
sharp bends in the heat element. Do not store other objects upon it.
27. Do not use the pad in areas of the body that are inflamed, injured or swollen. If in doubt, you
should seek medical advice before use. This also applies for diabetic persons.
28. This pad can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the pad in a safe way and understand the
hazards involved. Children shall not play with the pad. Cleaning and user maintenance shall not
be made by children without supervision.
29. Do not leave packaging components (plastic bags, cardboard, polystyrene, etc.) within the reach
of children, as it could be dangerous.
30. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
31. The cord should not come into contact with water or other liquids.
32. Do not place on or near a hot gas, electric burner or on ovens.
33. Never use the pad outside and always place it in a dry environment.
34. To avoid any risk of electrical shock do not immerse cord, plug, switch or pad in water or other liquid.
35. Never use the pad when it is wet. Do not use the electric pad while standing on wet surface or with
wet hands.
36. Unplug the pad before removing additional parts.
37. Prolonged use can cause burns on the skin. Caution! Avoid to fall asleep while the warming
heating pad is in operation.
Warning: Check the pad frequently for signs of wear or damage. If there are such signs or if
the pad has been misused, it must be returned to the manufacturer or dealer for check prior
to any further use.
If the mains cable is damaged, it should only be replaced at a repair workshop approved by
1.
the manufacturer, as special tools are required for the repair.
Repairs to the electrical pad must be carried out only by trained personnel. Improper repair could
2.
result in considerable risks for the user.
When the pad is not in use, the plug should be removed from the mains and the pad.
3.
Unplug the cord from the mains:
4.
when malfunction occurs during use
-
before cleaning
-
after use and for storing
-
Do not operate the pad with a damaged cord, if it malfunctions or has been damaged in
5.
any manner. Ask a (*) competent qualified electrician to check and repair it.
Should the cord be damaged, it must be replaced by a competent qualified electrician(*) to
6.
avoid any danger. All repairs should be made by a competent qualified electrician(*).
(*)Competent qualified electrician : after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to avoid
all danger. In any case you should return the pad to such electrician.
10