Conrad RW12MP Notice D'emploi page 63

• Now push the enclosed spacer into the intended guides at the rear of the camera.
This gives the camera more of a distance from the tree at the top and thus points it slightly
downward.
• Thread the belt into the provided opening of the camera on one side.
• Hold the camera against a tree and then thread the belt strap through the second opening of
the camera as well.
• Close the belt strap. Do not tighten it all the way yet, since the camera needs to be aligned
first.
• For this, best switch on the laser pointer. For this, push the switch into the "TEST" position and
activate the laser pointer with the button "*" on the remote control.
☞
Always observe all safety notes when operating the laser pointer.
63