Insertion Of The Memory Card; Commissioning Of The Remote Control; Battery Is Inserted And Secured With A Plastic Strip - Conrad RW12MP Notice D'emploi

b) Insertion of the memory card
☞
• The camera only starts when a memory card is inserted into the card slot!
The card must not exceed 32 GB in size and must be formatted with the file system
"FAT32". This can be done via the camera menu.
• Put down the camera so that the display points up.
• Take the memory card with the contacts pointing up and towards the camera.
• Push the card into the card slot until it latches.
☞
To remove the card again later, simply push the card to release the latch. Then you
can pull out the card again.

9. Commissioning of the remote control

To take the remote control into operation, only the battery CR2025 generally needs to be in-
serted.
Either the battery has been inserted ex works and secured with a plastic strip, or the battery is
enclosed separately.
a) Battery is Inserted and Secured with a Plastic Strip
• Here, it is sufficient if you just carefully pull the trip from the remote control.
Once the battery makes contact, the remote control is ready for use.
52