b) Battery is enclosed separately
• In this case, you need to insert the battery in the insert. Proceed as shown in the image.
• First, turn the remote control around so that the buttons point down.
• Push the small lever ("PUSH" in the figure) towards the middle and at the same time pull the
insert ("OPEN" in the figure) out.
• Insert the battery CR2025 into the insert. Observe the proper polarity (plus/+ and minus/-). If
the insert is placed as in the image, the plus pole of the battery must point up.
• Slide the insert back into the remote control until it latches.
• This completes insertion of the battery and the remote control is ready.
53