Triangle THETIS 340 Mode D'emploi & Garantie page 23

• If it does not have any Subwoofer or PRE-OUT output, you must connect the speaker outputs
of your amplifier to the HIGH LEVEL INPUT on your subwoofer.
For this, use of a hi-fi quality cable. During the connection, it is crucial to observe proper polarity to
ensure correct use: the red terminals «+» of the subwoofer must be connected to the «+» terminals
on your amplifier, the black terminals «-» to the «-» terminals on your amplifier.
The volume and the frequency roll-off must be set on the subwoofer. For the first time use, we
recommend setting the volume to half and the frequency roll-off (Crossover button on the
subwoofer) to 80Hz.
Your speakers can be connected to the HIGH LEVEL OUTPUT or directly to the amplifier.
See «Placement and Settings» (page 25) for more information on the settings.
PHONO
SIGNAL
GND
CD AUX RECORDER RECORDER SUBWOOFER
AUDIOIN AUDIOO UT PRE O UT
AC IN
23
INPUT
0 ON
30Hz 120Hz 180 OFF
LFE LINE IN
VOLUME CROSSOVER PHASE AUTO
A C T I V E S U B W O O F E R
HIGH LEVEL OUTPUT
HIGH LEVEL INPUT
ON
OFF
LEFT RIGHT LEFT RIGHT POWER
TRIANGLE DISTRIBUTION FRANCE
1940 Avenue Flandres Dunkerque 1940,
02200 Villeneuve-Saint-Germain FRANCE
EN