Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged
slowly until no steam cornes out. Then place the machine in a cool place to cool it down for
about five minutes. Finally, completely remove the safety cap.
4.
Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
5.
At last, re-install the safety cap onto the machine body and tighten it in position.
Notes: Re-install the safety cap onto the machine body and tighten it in position.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this
waste product into communities, you will need to inform your local authorities about the places where
you can return this product. In fact, electrical and electronic products contain hazardous substances
that have harmful effects on the environment or human health and should be recycled. The symbol here
indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is
marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Publicité
Table des Matières
