LaserLiner MultiMeter-Home Mode D'emploi page 13

Additional information on use
Observe the technical safety regulations for working on electrical
systems, especially: 1. Safely isolating from power supply,
2. Securing to prevent system being switched on again,
3. Checking zero potential, two-pole, 4. Earthing and short-
circuiting, 5. Securing and covering adjacent live components.
Safety instructions
Dealing with electromagnetic radiation
• The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
• Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
1
2
3
4
E B
A
D C
MultiMeter-Home
red
black
1 Analogue scale
2 Rotary knob for setting
the zero point
3 Rotary knob for setting
5
the zero point for
measuring resistance
4 Rotary switch to set the
measuring function
5 Holder for test prods
6 Test prods
7 Measuring contacts:
red "+", black "–"
A Resistance measurement
("OHM")
B Voltage measurement DC,
Current measurement DC
("
C Voltage measurement AC (" ")
D Battery charge status
E
measurement ("BATT.")
E OL: Open line/overflow:
measuring circuit not closed
or measuring range exceeded
6
")
EN
7
13