Sunset Function; Display Illumination - Beurer WL 30 Mode D'emploi

sunset function

With this function, the light gradually dims until it goes out completely (simulated sunset). You can choose
the time period after which the light automatically switches off. This function is ideal for when you are going
to sleep.
• Press the light control button.
The light will switch on.
• T o set the light intensity move the light control button up or down.
• P ress and hold the light control button for two seconds. A moon symbol and a
flashing number of minutes will appear on the display.
The number of minutes indicates the sunset duration.
The duration can be set to 15, 20, 40, 60, 80, 100 or 120 minutes.
• T o select the duration, move the light control button up or down. Confirm by
pressing the light control button.
The moon symbol will flash on the display next to the time. The light will now gradually dim over the set
period of time and automatically go out at the end.
• T o cancel the function early, press the light control button.
Goodnight function
This function automatically switches off the radio or a natural sound after a set period of time.
• S tart the radio or natural sound function.
• P ress and hold the volume control button for two seconds.
A moon symbol and flashing number of minutes will appear on the display.
The flashing number of minutes indicates the period of time (in minutes) after
which the radio or natural sound will automatically be switched off.
This can be set to 15, 20, 40, 60, 80, 100 or 120 minutes.
• T o set the time, move the volume control button up or down. Confirm by
pressing the volume control button.
The moon symbol will flash on the display.
The radio or natural sound will automatically be switched off once the set period
of time is up.
• T o cancel the function early, press the volume control button.

Display illumination

The display has three brightness levels.
• T o change the display brightness, move the display control button up or down.
The display can be illuminated in either blue or orange.
• T o change the colour of the display illumination, press the display control button.
The device offers an auto function. With this function, the display is illuminated in
blue from 0:00 to 11:59 AM and in orange from 0:00 to 11:59 PM.
• T o activate the auto function, press and hold the display control button briefly.
Auto will appear on the display.
• To switch off the auto function, move the display control button up or down.
15