Installation Area - Avintage DVP180G Notice D'utilisation

HOW TO INSTALL YOUR WINE CELLAR

INSTALLATION AREA

Be sure to install it in a suitable spot: far away from any heat source,
protected from sunshine, not exposed to low temperatures. This way you will
obtain the best operating conditions for the lowest energy consumption.
Also make sure that the surface area where the cabinet will be installed is
flat and resistant (weight of the device plus its load; a 75 cl wine bottle
generally weighs 1.3 kg).
Do not place it in the open air and be careful to maintain a minimum space
of 200 mm between the top of the cabinet and the ceiling located above it.
Note: the defrosting water recovery tank located at the back of the cabinet
near the compressor could overflow under extreme ambient conditions.
For this reason, we recommend choosing the appropriate kind of wall and
floor surfaces in the device's installation area so that humidity or the possible
formation of water does not cause any damage.
62