UNPACKING :
Depending on the models, remove the transport pallet on which your wine
cellar is placed by removing the two screws securing it to the frame at the
rear of the device. Remove all the wedging or protection elements present
inside.
LEVELS
Be careful to wedge and adjust the horizontality of your wine cellar. (The use
of a
spirit level is recommended). This will avoid any movement due to instability,
generating noise and vibrations, and will ensure the perfect tightness of the
door.
To do this, use the adjustable feet at the front of your wine cellar
(depending on the models).
You can also lean the device slightly backward to "force" the condensate
water
to flow (2/3 mm), which will prevent the formation of all kinds of deposits
(scales).
The adjustment is made by screwing and unscrewing.
SPACE
FREE STANDING INSTALLATION
Be sure to leave a space of at least 3 cm between the wall and the back of
your wine cellar to allow the free circulation of air. This device is not
designed to be built-in.
Make sure that the surface area where you are going to install the device
can support its weight and the weight of its contents (a 75 cl wine bottle =
1.3 kg on the average).
65