Lagrange PRO Mode D'emploi page 14

Masquer les pouces Voir aussi pour PRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Friteuses:Friteuse 5 langues
* To avoid any danger, do not use appliance if it has been dropped or
shows any visible signs of damage. In such a situation, return the
appliance to the after-sales service provider.
* Disconnect appliance when cooking is finished.
* Never immerse element, cord or control box in water. Clean them
with a damp cloth.
* When you refill the bowl, always make sure there is no water in the
bottom.
* Do not mix different types of cooking fats. Use a specialist deep-
frying oil.
* If you use a solid cooking fat, melt it first in another receptacle (see
Section 2 – Getting Started).
* Check that the oil level is always between the MIN and MAX levels
marked inside the bowl.
Never switch the fryer on when the bowl is empty or if the oil level is
below the MIN marker.
* Do not move the appliance while it is in operation or when it is
still hot.
* Never put the lid on the appliance when it is still cooling down.
Condensation will form on the lid and drop into the oil. This can cause
the oil to splatter or boil over.
* If you hear any spluttering sounds in the bowl while it is cooling
down after use, change the oil before you use the appliance again.
* Unplug appliance and let it cool down completely before any
cleaning operation.
* This appliance is intended for domestic use only. The manufacturer
will not accept responsibility in cases of any use for professional pur-
poses, inappropriate use or failure to comply with these instructions.
Such use is not covered by the guarantee.
13/12/07
17:30
Page 14
Set-Up and Use
_____________________________________________________________
1 First Use
When unpacking your appliance, ensure that all materials used to secu-
re the appliance in transit (wedges, etc.) are carefully removed.
* Remove lid and basket.
* Lift up the control box.
* Take out the bowl.
* Wash the inside of the bowl and the basket.
* Important: dry all parts carefully before use
Assembling Basket
* To attach handle: squeeze the two outside edges together and fit
them into the two housings situated inside the basket, at the bottom.
* Pull the handle backwards and clip it into the U-shaped orifice. This
locks it in place.
* To fold handle back after use, push it forwards towards inside of
basket.
2 Getting Started
* Put all the parts in place (bowl, control box). The control box must
be properly inserted into its runners.
NB: the control box is fitted with a safety cut-out: it will not operate
unless fitted correctly to the appliance.
* Put your appliance in your chosen position (level surface).
* Fill fryer with specialist deep-frying oil, making sure that
the level falls between the (lower) MIN and (higher) MAX
markers inside the bowl. Oil capacity is:
- approx. 2.5 litres (Compact PRO® model REF 369 001)
- approx. 4 litres (Super PRO® model REF 369 005).
14
Handle Assembly

Publicité

Table des Matières
loading

Table des Matières