Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Viva VVK2I2 Série Notice D'utilisation

Characteristics of the pan base
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.

Getting to know your appliance

On page 2, you will find information on the dimensions and
power of the hotplates.

The control panel

Controls
Main switch
#
Hotplate
j
Adjustment buttons
/
A @
Wipe protection
@
Childproof lock
R
Powerboost function
m
Timer
0
Combi zone function
n
powerMove function
o

The hotplates

Hotplate
Single-circuit hotplate
$
Combined hotplate
à
Only use cookware that is suitable for induction cooking; see the "Cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching them when this
indicator is lit.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Displays
Operating mode
‹
Heat settings
-
‚ Š
Powerboost function
›
Residual heat
/
• œ
Childproof lock
‚
Timer
‹‹
Automatic switch-off
x
Timer
S
Combi zone function
ö
Control panels
Pressing a symbol activates its corresponding function.
Note: Always keep the control surfaces dry. Moisture can affect
proper working.
Use cookware that is a suitable size.
See the Combi zone function or Move function section.
Although the hob is switched off, the indicator
remain on for as long as the hotplate is hot.
If the pan is removed before the hotplate is turned off, the
indicator œ or •
alternately.
and the selected power level will appear
or will
œ •
33