Publicité
Les langues disponibles
Les langues disponibles
Alarm operation:
•
The alarm will sound for up to a maximum of 120 seconds at
the set alarm time:
- first 10 seconds 1 beep per second
- then 10 seconds 2 beeps per second
- then 10 seconds 4 beeps per second
- then 90 seconds continuous beeping
Press a random button at the rear of the clock to stop the alarm
signal earlier or press the SNOOZE/LIGHT button on top of the
clock to enable the snooze function; Zz starts flashing and the
wake-up alarm will sound again after 5 minutes.
Other functions.
Switching the DCF receiver on/off:
You may switch off the DCF receiver as follows to only display the
time as you've programmed it:
•
To disable: press and hold the UP button at the rear of the clock
for 3 seconds until the antenna symbol disappears
You may switch the receiver back on again as follows:
•
To enable: press and hold the UP button at the rear of the clock
for 3 seconds until the antenna symbol starts flashing and the
clock starts searching for the DCF signal.
-29-
Publicité
