Alecto AK-30 Mode D'emploi page 28

Wake-up function.
To set the wake-up time:
1. Briefly press the MODE button, the current wake-up time is
displayed followed by "AL"
2. Press and hold the MODE button for 3 seconds, the alarm
hours start flashing
3. Use the UP and DOWN buttons to set the alarm hours, press
the MODE button, the alarm minutes start flashing
4. Use the UP and DOWN buttons to set the alarm minutes, press
the MODE button
5. The wake-up time settings are closed and the actual time is
displayed
To check the wake-up time:
1. Briefly press the MODE button, the current wake-up time is
displayed followed by "AL".
2. After 5 seconds the actual time is shown again.
To switch the alarm function on/off:
1. Briefly press the MODE button, the current wake-up time is
displayed followed by "AL"
2. Press and hold the DOWN button for 3 seconds:
- on: the wake-up function is enabled
- off: the wake-up function is disabled
3. Press the MODE button and the actual time is shown again
-28-