Publicité
Les langues disponibles
Les langues disponibles
7. 20°C, this shows the temperature
8. °C = temperature display in degrees Celsius, °F = temperature
display in degrees Fahrenheit
9. 53%, this shows the humidity
10. Clock symbol, illuminates when the wake-up function is enabled
Manual time settings.
If the clock is unable to receive the DCF radio signal, you may set
the time manually as follows:
1. Press and hold the MODE button for 3 seconds, "24Hr" starts
flashing
2. Now use the UP and DOWN buttons to adjust the settings in the
following order:
- 12Hr or 24Hr clock, press the MODE button
- the hours, press the MODE button
- the minutes, press the MODE button
- the year, press the MODE button
- the month, press the MODE button
- the day, press the MODE button
- the time zone (for use in the Benelux, set to '0'), press the
MODE button
3. The time is now set.
Although the day, month and year are not shown you must
set these parameters, otherwise the clock is unable to
switch back and forth between daylight saving time and regular
time.
-27-
Publicité
