Panel Installation - Daikin C Série Manuel D'installation

Panel Installation

• The front panel can only be fitted in one direction.
• Open the air intake grille by pulling back the catchers and removing it together with fi lter from
panel.
• Install the front frame panel onto the indoor unit by 4 screws and tighten it completely to prevent
cool air leakage.
• Connect the LED wire and air swing wire to the indoor unit.
From
Front
Panel
NOTE
Install the front frame panel fi rmly to prevent cool air leakage which will cause condensation
and water dripping.
Cool Air
1 IM 5CKC-0912(0)DAIKIN-EN.indd 8 1 IM 5CKC-0912(0)DAIKIN-EN.indd 8
Open
LED Wire
Air Swing Wire
Indoor Unit
Air Leak
Ceiling Board
Panel
1-8
Screw
From
Control
Box
Cool Air
Air Leak
Ceiling Board
Panel
10/9/12 9:42:52 AM 10/9/12 9:42:52 AM