User Instruction Operation - Hapro Luxura V7 Mode D'emploi

Operation
The machine is set up for standard use with an external timer or a coinbox. If the
machine must function without the external timer or coinbox, i.e. with an internal
timer, the required tanning time will have to be adjusted according to the following
procedure.
+
Body cooling lower Body cooling higher
Body cooling higher
Body cooling lower
General:
Hold the buttons for "body cooling lower" and "body cooling higher" down together for 10 seconds.
After 10 seconds, the display will show "00" (tanning time).
By pressing the button "body cooling higher" you can increase the tanning time (maximum 30 minutes).
By pressing the button "body cooling lower" you can decrease the tanning time.
Pressing the "start" button confirms the adjustment.
When confirming, there will be a short electronic bleep tone.
If the use of an external timer is chosen, the indication "-A" will be displayed.
The use of an internal timer will be indicated by the display of "-H".
Note
a. Should the set up need to be interrupted, this can be done by pressing the "stop" button.
b. If no adjustment is entered within 30 seconds, the operation will return to its original settings.
c. When using an external timer or a coinbox, the tanning time indicator must be set at 0.
Operation in combination with an external timer or coinbox:
The machine starts up automaticall y if there is no "remote start" function on the external timer or coinbox. If this function is
available, the machine must be started by pressing the "start" button.
Note: If the external timer or coinbox does not have a "remote start" function, but the machine has to be started up using the
"start" button, you dealer will be able to set this up for you.
By pressing the "stop" button once, the machine's operation will be paused. If the"stop" button is pressed several times, the
machine will remain set at pause. The machine will onl y stop when the tanning time has expired.
If the machine is set at pause, it can be restarted by pressing the "start" button.
Note: The tanning time ascends numericall y .
- 8 -