Intended Use; Overview Of The Components / Scope Of Delivery; Unpacking The Appliance; Initial Operation - Proficook PC-ICM 1091 N Mode D'emploi

It is intended for use in the household and in similar applications,
such as:
• In personal kitchen areas in shops, offices and other work areas;
• By guests in hotels, motels and other accommodation;
• In bed and breakfast accommodation;
• In agriculture;
• In catering and similar wholesale use.
Overview of the Components /
Scope of Delivery
1 Lid
2 Cap for fill opening
3 Display
4 button
5 button
6 button
7 Control knob
8 Base with compressor
9 Ventilation slots
10 Container
11 Stirrer
Not Shown:
Measuring cup (max. 250 ml)
Spatula

Unpacking the Appliance

CAUTION:
When unpacking the device and removing packaging ma-
terial, make sure not to tilt the device by more than 45 °,
otherwise the cooling compressor could get damaged.
1. Remove the appliance from its packaging.
2. Remove all the packaging material such as plastic bags,
filler material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the package.
4. Check the device for any potential transport damage in
order to avoid hazards.
5. The appliance may still contain dust or production res-
idues. We recommend that you clean the appliance as
described under "Cleaning".
NOTE:
• If there is any sign of transport damage, contact your
dealer immediately. Do not put a damaged device into
operation!
42
PC-ICM1091N_IM

Intended Use

NOTE:
• A rattling noise can be caused during transport due
to the design of the device. This is not a reason for
complaint.
WARNING:
The refrigerant circuit of the device uses the refrigerant
isobutane (R600a), a flammable natural gas with high
environmental sustainability. When transporting and
installing the device, prevent the device from falling down.
The refrigerant circuit must not get damaged.
If the Refrigerant Circuit is Damaged:
• Open flames and ignition sources must be avoided.
• Disconnect the mains plug.
• Ventilate the room in which the device is installed.
CAUTION:
Please observe a waiting period of 2 hours before initial
operation and after moving the appliance for the refriger-
ant to settle; otherwise the compressor can be damaged.
Electrical Connection
1. Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a duly installed protective
contact socket
Display indicators

Initial Operation

Notes for Use

Standby mode
Ice cream preparation (stirring tool
and cooling is active)
30.10.18