Doro PhoneEasy 311C Mode D'emploi page 6

Memory
The telephone has 3 one-touch and 10 two-touch memories. One-touch
memories are stored in M1, M2 & M3, two touch memories are stored using
the telephone keypad digits 0-9.
Storing One-touch Memories
Lift the handset, press and release
1.
earpiece).
Select a memory location M1, M2 or M3 by pressing the corresponding
2.
button.
Enter the telephone number to be stored (up to 21 digits).
3.
Press and release
4.
Replace the handset. The number is now stored.
5.
Dialling using One-touch Memories
Lift the handset and wait for a dialling tone.
1.
Select a memory location by pressing the corresponding memory button
2.
(M1, M2 or M3). The stored number will now be dialled.
Storing Two-touch Memories
Lift the handset, press and release
1.
earpiece).
Press and release
2.
Select a memory location by pressing one of the keypad number buttons
3.
- .
0 9
Enter the telephone number to be stored (up to 21 digits).
4.
Press and release
5.
Replace the handset. The number is now stored.
6.
Dialling using Two-touch Memories
Lift the handset and wait for a dialling tone.
1.
Press and release
2.
Select a memory location by pressing the relevant keypad number
3.
The stored number will now be dialled.
Press and release
r
number stored in memory can then be entered on the memo list if wished. If a stored number
changes, follow the procedures above entering the new number in the same location as the old
one.
again.
P
.
m
again.
P
.
m
if you need to insert a pause in a telephone number. The name or
English
(ignore anything you hear in the
P
(ignore anything you hear in the
P

- .
0 9