Alpine SEC-8063 Mode D'emploi page 28

1
2
28
ACC
VALET
Basic Operation
Disarm/Valet Switch
Disarming
The SEC-8063 can be disarmed manually
using the disarm/valet switch.
Note: When coded disarm is registered, the
system can not be disarmed by the
method shown below. In this case
disarm the system by using Remote
Controlled Disarming (See page 26) or
by Coded Disarm (See page 30).
Enter the vehicle. The security system will
sound siren.
Turn the ignition switch to the ON position.
Within 15 seconds, find the Disarm/Valet
switch and turn it to the ON position.
Note: When disarmed, refer to the steps 2 –
5 on page 26.
English