Alpine SEC-8063 Mode D'emploi page 144

Table des Matières

Publicité

1. Navigation Integration (Off/On)
Intégration de navigation (Désactivée/
Activée)
Integración de navegación
(Desactivada/Activada)
2. Mayday Integration (Not connect/
Enable/Disable)
Intégration Mayday (Pas connectée/
Activée/Désactivée)
Integración Mayday (No conectada/
Habilitada/Inhabilitada)
3. Ajar Delay Time (2 min/4 min/6 min)
Temps de retard Ajar (2 min/4 min/6
min)
Tiempo de retardo Ajar (2 min/4 min/6
min)
4. EXT Expansion (Off/On)
Expansion EXT (Désactivée/Activée)
Expansión EXT (Desactivada/Activada)
144
English/Français/Español
System Integration Setup
Programmable Features
Off:
Disables communication between
Mayday system and Navigation
system.
On:
Enables communication between
Mayday system and Navigation
system.
Not Connect: The SEC-8063 is not con-
nected to the optional HCX-
B200A Mobile Mayday System.
Enable:
The SEC-8063 is connected and
fully functional with the optional
HCX-B200A Mobile Mayday
System.
Disable:
The SEC-8063 is connected to
the HCX-B200A Mobile Mayday,
but communications are tempo-
rarily halted between the two
systems.
2 min:
When forgetting to close door or
hood/trunk after arming, sets the
time it takes the alarm to transmit
to Mayday system to 2 minutes.
4 min:
When forgetting to close door or
hood/trunk after arming, sets the
time it takes the alarm to transmit
to Mayday system to 4 minutes.
6 min:
When forgetting to close door or
hood/trunk after arming, sets the
time it takes the alarm to transmit
to Mayday system to 6 minutes.
Off:
SEC-8343 not connected.
On:
SEC-8343 EXT Expansion
Module is connected. This module
adds 8 additional EXT outputs to
the security system.
English

Publicité

Table des Matières
loading

Table des Matières