Alpine SEC-8063 Mode D'emploi page 124

1
2
3
124
2.3
VALET
Advanced
Operation
Demonstration
The SEC-8349 Security Display Module can
run in a demonstration mode to display the
system's various features and possibilities.
Please make sure to stop this mode while
driving as it can be distracting.
During the Disarm, Valet, or Ignition ON
mode, turn and hold the Disarm/Valet switch
to set it ON.
Press the MODE button while the Disarm/
Valet switch is ON.
The demonstration will start after "DEMO
MODE" has scrolled once on the display.
To exit the demonstration, press the MODE
button while the Disarm/Valet switch is ON.
English