Alpine SEC-8063 Mode D'emploi page 134

Table des Matières

Publicité

11.Door Unlock Pulse (700msec/900msec/
3sec/Double)
Impulsion de déverrouillage de porte
(700msec/900msec/3sec/Double)
Pulso de desbloqueo de puertas
(700mseg./900mseg./3seg./Doble)
12.Exit Delay (10 sec/30sec)
Délai de sortie (10 sec/30 sec)
Retardo de salida (10 seg./30 seg.)
13.Chirp (Pre-Warn) (Short/Long)
Signal sonore (préavertissement)
(Court/Long)
Sonido (Prealarma) (Corto/Largo)
14.Alarm Output Select (Constant/Pulsed)
Sélection de sortie d'alarme
(Constante/Pulsée)
Selección de salida de alarma
(Constante/Pulsada)
15.Warning output (Constant/Pulsed)
Sortie d'alarme (Constante/Pulsée)
Salida de advertencia (Constante/
Pulsada)
134
English/Français/Español
Function Setup
Programmable Features
700msec: The door unlock pulse will be set
to 700m seconds.
900msec: The door unlock pulse will be set
to 900m seconds.
3sec:
The door unlock pulse will be set
to 3 seconds.
Double:
The door unlock pulse will be set
to 750m seconds is ON → 250m
seconds is OFF→ 750m seconds
is ON.
10 sec:
The system will passively arm 10
seconds after the last door or
hood/trunk is closed.
30 sec:
The system will passively arm 30
seconds after the last door or
hood/trunk is closed.
Short:
The Pre-Warn chirp sounds like
regular arm/disarm chirps.
Long:
The Pre-Warn chirp is extended
and longer.
Constant: The alarming output will stay on
constantly when the system is
tripped or panicked for the
duration of the alarm cycle.
Pulsed:
The alarming output will pulse on
and off when the system is tripped
or panicked for the duration of the
alarm cycle.
Constant: The alarming output will stay on
constantly when the system is
tripped or panicked for the
duration of the warning cycle.
Pulsed:
The alarming output will pulse on
and off when the system is tripped
or panicked for the duration of the
warning cycle.
English

Publicité

Table des Matières
loading

Table des Matières