Alpine SEC-8063 Mode D'emploi page 136

Table des Matières

Publicité

16.Sensor Scan (Off/On)
Vérification des capteurs (Désactivée/
Activée)
Exploración de sensor (Desactivada/
Activada)
17.Siren (On/Off)
Sirène (Activée/Désactivée)
Sirena (Activada/Desactivada)
18 Priority Unlock (Off/On)
Priorité de déverrouillage (Désactivée/
Activée)
Prioridad de desbloqueo (Desactivada/
Activada)
19.Pre-Warn (Off/On)
Préavertissement (Désactivé/Activé)
Prealarma (Desactivada/Activada)
20.Warning Chirp (On/Off)
Signal d'avertissement (Activé/
Désactivé)
Sonido de alarma (Activado/
Desactivado)
136
English/Français/Español
Function Setup
Programmable Features
Off:
Any triggered sensor will cause
the system to enter alarming
mode.
On:
Both Impact and Radar sensors
must be detected at the same
time in order to trigger an
alarming mode. Doors and hood/
trunk instantly trigger an alarm
mode regardless of Sensor Scan
status.
On:
Siren sounds during the alarming
state.
Off:
Siren does not sound during the
alarming state.
Off:
All doors will unlock at the same
time.
On:
The driver's door will unlock first,
then, when the TX/PANIC button
is pressed a second time within 5
seconds, all other doors will
unlock.
Note: When the Ignition Unlock function is
set to ON, do not press the TX/PANIC
button within 5 seconds after setting
the ignition to OFF. If pressed, all the
doors will be unlocked.
Off:
Impact Pre-Warn is turned off.
On:
Impact Pre-Warn chirps are
turned on.
On:
Turns on Warning and Pre-Warn
chirps.
Off:
Turns off Warning and Pre-Warn
chirps.
English

Publicité

Table des Matières
loading

Table des Matières