Set-Up And Installation - Cameo CL 200 Manuel D'utilisation

SYSTEM INFORMATION (System)
In order to view system information, press the MODE button repeatedly until "Menu" appears in the top line of the display. If necessary, select the
menu item "Menu System" using UP and DOWN and press ENTER. Use UP and DOWN to select the desired sub-menu item, and press ENTER to
display the relevant information.
System
Firmware = Anzeige der Software-
version
Temp = Anzeige der LED-Tem-
peratur in Grad Celsius
oder Fahrenheit
Menu ENTER
System
UP/DOWN
RESET
To restore the spotlight's factory settings, keep the MODE button pressed down for approx. 5 seconds.

SET-UP AND INSTALLATION

The integrated double bracket allows the lamp to be positioned in a suitable location on a level surface. Installation on a traverse is possible
using a suitable traverse clamp (not supplied). Ensure firm connection to the mounting bracket and secure the spotlight to the securing lug (A)
with a suitable safety cable.
Important: Overhead installation may only be carried out by qualified personnel.
8
V1.xx
Temp LED
Temp
C/F
System
V1.xx
ENTER
Firmware
/
System ENTER
Temp
UP/DOWN
ENTER
xxx°C/°F
Anzeige der Information durch Drücken auf ENTER
Temperaturanzeige durch Drücken auf ENTER
Einstellen der Temperatureinheit auf Grad Celsius oder
Fahrenheit. Auswahl mit UP und DOWN, mit ENTER
bestätigen.
Temp Temp
/
LED °C/°F
ENTER - UP/DOWN
LED Unit
°C
ENTER
Unit
/
°F
ENTER
A