Table des Matières
Publicité
Please read these operating and safety instructions carefully and
completely. For your own safety, before using this equipment
check that the voltage is correct and that all handles and parts are
firmly secured. If you are uncertain about any aspect of using this
equipment, please contact our Technical Helpline.
Technical Helpline UK: 0870 609 2297
Technical Helpline USA: 1-866-EVO-TOOL
Fury 3 Multi Purpose Sliding Mitre Saw
Congratulations on your purchase of an Evolution Power
Tools Fury 3 Sliding Mitre Saw. Please complete and mail
your product registration card. Doing so will validate your
machine's warranty period and ensure prompt service if
needed. We sincerely thank you for selecting a product
from Evolution Power Tools.
CAUTION: IMPORTANT
SAFETY INSTRUCTIONS
To reduce the risk of electric shock, this equipment is fitted
with an approved cord and plug for its intended Country of
use. Do not change the plug or cord in any way.
GENERAL SAFETY RULES
WARNING: For Your Own Safety. Read Instruction Manual Before
Operating Mitre Saw.
1.
KEEP GUARDS IN PLACE and in working order.
2.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of
checking to see that keys and adjusting wrenches are removed from
tool before turning it on.
3.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
4.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power
tools in damp or wet locations, or expose them to rain. Keep work
area well lit.
5.
KEEP CHILDREN AWAY. All visitors should be kept a safe
distance from work area.
6.
DON'T FORCE TOOL. It will do the job better and safer at the
rate for which it was designed.
7.
USE PROPER EXTENSION CORD. Make sure your extension
cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. An
undersized cord will cause a drop in line voltage resulting in loss of
power and overheating.
8.
WEAR PROPER APPAREL. Do not wear loose clothing, gloves,
neckties, rings, bracelets, or other jewellery which may get caught in
moving parts. Nonslip footwear recommended. Wear protective hair
covering to contain long hair.
9.
ALWAYS USE SAFETY GLASSES. Also use face or dust mask if
cutting operation is dusty. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
10. SECURE WORK. Use clamps to hold work when practical. It's safer
than using your hand and it frees both hands to operate tool.
11. DON'T OVERREACH.
times.
12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for
best and safest performance. Follow instructions for lubricating and
changing accessories.
13. DISCONNECT TOOLS before servicing and when changing
accessories, such as blades.
14. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure
switch is in off position before plugging in.
15. USE RECOMMENDED ACCESSORIES. Only use genuine Evolution
accessories.
16. NEVER STAND ON TOOL. Serious injury could occur if the tool is
tipped or if the cutting tool is unintentionally contacted.
Important
Keep proper footing and balance at all
2
Publicité
Table des Matières
