Publicité
Les langues disponibles
Les langues disponibles
34035L
34035L
1
Keep work area clean. Cluttered areas invite injuries.
2
Observe work area conditions. Do not use the Battery Tester in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3
Keep children away. Children must never be allowed in the work area. Do not let
them handle the Battery Tester.
4
Store idle equipment. When not in use, products must be stored in a dry location to
inhibit rust. Always lock up products and keep out of reach of children.
5
Use the right product for the job. Do not attempt to force a small Battery Tester to do
the work of a larger industrial Battery Tester. There are certain applications for which
this Battery Tester was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this Battery Tester and do not use this
Battery Tester for a purpose for which it was not intended.
6
Dress properly. Do not wear loose clothing or jewelry as they can be caught in the
Battery Tester. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield when working with battery acid. Wear an ANSI approved dust
mask or respirator when working around metal, wood, and chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
9. Maintain tools with care. Keep the Battery Tester clean for better and safer
performance. Follow instructions for changing accessories. Inspect product cords
periodically, and if damaged, have them repaired by an authorized technician. The
handles must be kept clean, dry, and free from oil and grease at all times.
10. Disconnect power. Disconnect from battery when not in use.
11. Avoid unintentional starting. Be sure the switch is in the "Off" position when not
in use.
12. Stay alert. Watch, what you are doing, use common sense. Do not operate any
product when you are tired.
13. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function.
Check for alignment and binding of moving parts; any broken parts or
mounting fixtures; and any other condition that may affect proper operation.
Any part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the product if any switch does not turn "On" and
"Off" properly.
14. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
SW-Stahl GmbH
Leverkuser Straße 65
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
SW-Stahl GmbH
E-Mail: info@swstahl.de
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
www.swstahl.de
www.swstahl.de
Publicité
