Preparations
Attaching the battery
An optional battery pack (CGR-H712) is also available. The procedure for attaching and
detaching is the same.
Bottom side of this unit
RELEASE
DETACH
ATTACH
Detaching
Turn the unit off before detaching the battery pack.
2
RELEASE
DETACH
1
Press and hold
Recharging the battery
DC IN 12 V
DC IN
You can also use this unit without charging while
connecting the AC adaptor and the AC power supply
cord.
You can also use this unit without charging while
connecting Car DC Adaptor (➜ page 30, Enjoying in a car).
To conserve power
This unit consumes 0.3 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC power supply cord from the
household AC outlet.
8
8
(When the unit is off)
Battery pack
Check to make sure it is securely fastened.
When not using for long periods of
time
Remove the battery pack (➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
ATTACH
unit, and this may result in a malfunction.)
Recharge the battery for re-use.
(When the unit is off)
AC power supply cord
(included)
AC adaptor
(included)
RELEASE
DETACH
ATTACH
Clicks into place
To
household
AC outlet
CHG
Started
Finished
goes out ➜ lights
[ ]
➜ goes out
[CHG]
lights
Recharging time :
Approx. 8 hours (CGR-H713, included)
Approx. 6 hours (CGR-H712, optional)
When finished, disconnect the AC
adaptor and the AC power supply cord.