Overview Of The Led Displays; Settings For Best Sound; Help With Problems / Faq; Battery Life - Beyerdynamic Blue BYRD Mode D'emploi

Help with problems / FAQ

Overview of the LED displays

LED display
Flashes red/yellow/green
Steady green light
Lights up once red for 1.5 s
Flashes rapidly red
Flashes alternately blue
and red
Flashes blue briefly every
7 sa
Flashes blue briefly every
3 s
Flashes blue briefly every
7 s
Flashes rapidly blue
Flashes blue briefly every
7 s
Lights up pink three times
per s

Settings for best sound

To achieve the best possible Bluetooth® sound with
your in-ear headphones, please observe the following
practical tips:
1. Set the volume to minimum on the in-ear headphones
and to maximum on the playback device.
2. Then adjust the volume only on the in-ear headphones,
not on the playback device.
This applies only to playback devices that do not
automatically synchronise the volume. On playback
devices that automatically synchronise the volume
(e.g. iPhone, iPad and various Android smartphones), the
headphone volume is always identical to the volume of
the playback device.
3. Deactivate any audio effects that may be present in
the software of the playback device.
HELP WITH PROBLEMS / FAQ
In-ear headphones will not switch on
Battery is empty or almost
empty.
No audio output .
There is no Bluetooth®
connection.
12/14
Function
Charging
Fully charged
Switch off
Battery almost empty
Bluetooth® pairing mode
active
Bluetooth® connection
active
Bluetooth® connection lost
Media playback active
Incoming call
Call active
Software update mode
active
► Charge the battery.
► Pair in-ear headphones
with the playback
device.
The in-ear headphones do not appear among the
available Bluetooth® devices on the playback device .
The in-ear headphones are
switched off.
The in-ear headphones are
not in pairing mode.
There is already a
Bluetooth® connection to
another playback device.
Playback volume is too low, although set to maximum on
the in-ear headphones
The audio signal being
played back is too quiet.
The sound is harsh and the bass reproduction too low
Insufficient seal on the
earphones.
The wireless range is too low, or the connection is
disrupted
There is interference with
other devices.

BATTERY LIFE

• Disconnect the USB connection cable from the charger
and in-ear headphones when battery is fully charged.
• High temperatures, especially with a high charge level,
can cause irreversible damage.
• For battery storage, see Seite 7.
• Switch off the battery-powered product after use.

CLEANING AND MAINTENANCE

• Use a soft cloth moistened with alcohol cleaner to
clean all parts of the in-ear headphones. Make sure
that no liquid enters the housing or the transducer.
• Do not use cleaners containing solvents, as these can
damage the surface.

SPARE PARTS

Spare parts for the in-ear headphones can be found at
www.beyerdynamic.com/service.
► Switch on the in-ear
headphones.
► Set the in-ear head-
phones to pairing mode.
► Disconnect the
Bluetooth® connection
to the other playback
device and connect the
in-ear headphones to
the desired device.
► Set playback volume on
the playback device to
maximum.
Try out alternative left and
right eartips until sound is
ideal.
► Keep your distance
from WLAN routers and
microwave ovens.
► Do not stand between
playback device and
in-ear headphones.
Blue BYRD