Important Safety Instructions; Main Features; Protection Features - BS Charger BS 10 Manuel D'instruction

User manual and guide to professional battery
EN
charging for Starter and Deep Cycle batteries
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR BATTERY CHARGER & MAINTAINER: BS 10
Lithium (LiFePO4) & Lead Acid compatible

IMPORTANT SAFETY INSTRUCTIONS

Please read this manual and follow the instructions carefully before using the charger.
WARNING
• The battery charger is designed to charge 6V/12V Lead Acid batteries (LA) or 12V Lithium (LiFePO4) (LFP) battery from 2Ah to
20Ah and maintain batteries up to 40Ah.
• We always recommend that you check the Battery Manufacturers specifications before using this charger.
•
Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames and sparks.
•
For indoor use. Do not expose charger to rain, snow or liquids.
•
Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
• Never charge a frozen battery.
• Never charge a damaged battery.
•
Never place the charger on the battery while charging.
•
Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical
part that may cause explosion.
• When working with a Lead Acid battery, remove personal metal items such as rings, bracelets, necklaces, watches...
• NEVER smoke or allow a spark or flame in vicinity of battery or engine.
• Do not charge non-rechargeable batteries.
•
In order to reduce risk of electric shock, unplug charger from AC outlet before doing any.
•
maintenance or cleaning. Turn off controls will reduce risk.
• The kit is not supposed to be used by children or by people who are not able to understand the manual, unless they are supervised
by a responsible person who ensures the proper use of the kit.

MAIN FEATURES

• Auto Detect – Auto-detect for Lead acid or LiFePO4 battery hooked.
• Adaptable charging algorithm – Enable the precise charging algorithm targeted for Lead acid or LiFePO4 batteries.
•
Smart re-activation – Allows it to wake up "dead" LiFePO4 batteries where the BMS under-voltage protection has been triggered.
•
Two voltage mode – Charge 6V or 12V batteries.
• Battery qualification detection – Automatically detect the battery initial voltage.
• Low voltage Start – Activate the heavy discharged low-voltage battery.
• Battery bad cell detection – Smart detection to the battery bad cells and error indication.
• Weak or sulphated Battery detection – Automatically detect the weak or heavy-sulphated battery and error indication.
•
Charging time management – Multiple charging stages and charging time management.
•
Pulse maintenance – Long term pulse mode maintenance to keep the Lead acid battery at optimal performance.
• Flexible output cable – Detachable clamps terminal cord sets with SEA connector.

PROTECTION FEATURES

•
Connection spark free.
•
Never overcharge your battery.
• Output short circuit or reverse polarity protection.
• Charging timer for each charge phase protection.
•
Thermal run-away protection at the battery side.
•
Internal over-heat protection.
•
Conformal coatings prevent from moisture for the inside circuit board.
• Corrosion-resistant output connectors.
| www.bs-battery.com
3