Chicco Polly Mode D'emploi page 3

I
NstRuctIoNs
WARNING
HOW TO ASSEMBLE / OPEN THE HIGHCHAIR
1A
1B
2
F u
oR se
When opening the highchair, ensure that your child, or
other children, are at a safe distance. Ensure that during
these operations, the movable parts of the highchair do
not come into contact with your child.
The ends of the front and rear legs have a different shape
to avoid errors in the assembly phase.
1A. Fix the legs to the highchair frame as shown
in diagram 1.
Rear legs: keep the two locking buttons located
at the base of the frame pressed down and insert
the legs. The parts are correctly locked only when
the two locking buttons come out from the holes
on the legs, and an audible click is heard, signal-
ling that the legs are securely fitted (diagram 1A).
1B. Front legs: keep the two locking buttons,
located at the base of the frame, pressed down
and insert the legs into the structure. The parts
are locked only when the two locking buttons
come out from the holes on the legs, and an
audible click is heard, signalling that the legs are
securely fitted (diagram 1B).
2. Stand at the back of the highchair and hold
the two side joints, then press the open / close
buttons. At the same time, open the Highchair
legs using your foot, until an audible click is
heard, signalling that the legs are locked in the
open position (diagram 2).