Firing Guide - Jydepejsen Country 575 Manuel D'installation Et D'utilisation

uK

5. Firing guide

It is very important to ensure that the chimney has proper extraction. It is crucial that the chimney functions with the stove.
Please ask your retailer or the chimney sweeper about the chimney conditions.
Once the conditions are in order, the next step is ensuring that the chimney and stove function well together. In order to
ensure optimal conditions, please follow the instructions in the operation manual carefully, and remember to use dry and
inflammable wood. You can find further information about firing in Jydepejsen's Handbook on Installation and Firing.
Please note that the varnish hardens during the first firing – please avoid touching the stove during this phase, since the
varnish may peel off. We recommend that you ventilate well during the first firing, since smoke and odour may emerge.
The smoke and odour are harmless and disappear after approx. 1 hour.
Since the stove expands during firing and cooling, crinkle noises may occur. The phenomenon is completely normal for
steel plate stoves and should not be regarded to be a defect. All wood-burning stoves from Jydepejsen are intermittent,
which means that wood has to be put on the fire, once a glowing layer exists inside the combustion chamber.
Firing or combustion faults often result from moist wood or inadequate chimney extraction.
Please check, whether the chimney is partially or completely blocked and whether the smoke bypassers are placed
correctly.
In case of over temperature or chimney fire, disconnect the air supply and observe the situation.
Do not extinguish a chimney fire with water, since water vapour will emerge immediately (water vaporises in the scale 1:1700),
which may cause severe damage to the stove, due to the quick pressure increase.
Position of DuplicAir®
DuplicAir®