Philips LED Fog H8 Mode D'emploi page 4

• The product is applicable only to fog lamps with a 12-V car
voltage, not to "low beam" and "high beam" headlights
• The product must be replaced with Halogen H8/H11/H16. Before
replacement, please confirm the type of halogen bulb in use
• A vehicle with idling or stopped loading function, or low battery
level, may not light up the LED, or the LED may flash temporarily
at the time of starting. This is normal due to the power supply
system, not the LED fog itself
• Some of the beam pattern with LED fog is within the applicable
scope of the car inspection. However, as the inspection apparatus
is incomplete in some car inspection stations, the inspector's visual
inspection is sometimes required to make a judgement. Failure to
pass the car inspection may occasionally occur. In this case, please
restore the original halogen bulb
• Occasionally, the warning lamp on the dashboard may light up,
indicating the light source is burnt out or abnormal on the vehicle.
Please check with the distributor for the warning canceller. Other-
wise, please restore the original halogen bulb
Precautions, please read carefully
m WARNING
• Do not stare at an illuminating lamp, as this may hurt the eyes
• In case of any abnormality (flashing, making noise, etc.), park your
car in a safe place and check the lamp
• Keep out of reach of children
4