Technical Data; What To Do If; General Conformity Declaration - Becker Centronic EasyControl EC545 Notice De Montage Et D'utilisation

Nominal voltage
Type of battery
Protection class
Permissible surrounding temperature
Radio frequency
Problem
Drive is not functioning,
transmission control
light is not lit.
Drive is not functioning,
transmission control
light is lit.
Transmission control
light is flashing.
The required drive is not
functioning.

General conformity declaration

Becker-Antriebe GmbH hereby declares that the device EC545 Centronic Easy-
Control complies with the basic requirements and other relevant regulations of
the EC Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH
Subject to technical changes without notice.

Technical data

3 V DC
LR 03 (AAA)
IP 20
-10 to +55 °C
868.3 MHz

What to do if ...?

Cause
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
Batteries are running
out.
Wrong group selected.
Remedy
1. Insert new batteries.
2. Insert batteries cor-
rectly.
1. Reduce distance to
the receiver.
2. Programme transmit-
ter.
Insert new batteries.
Select correct group.
de
en
fr
nl
15