Troubleshooting Guide - Montiss CVC638 Mode D'emploi

C. Charging the vacuum cleaner
1. When charging, please put
the vacuum cleaner in the
charging cradle, before
plugging the charger into an
outlet. The charging cradle
should be placed near the
wall, prevent accidents
such as tripping.
Suggestion: After using the vacuum cleaner, you can put the vacuum cleaner and its accessories on
the specifically designed charging cradle so that you can access it conveniently the next time you
use it.

TROUBLESHOOTING GUIDE

PROBLEM
Machine doesn't work
The machine can't pick
up ash or suction is very
weak
Dust escapes from the
vacuum cleaner
Vacuum cleaner doesn't
pick up after the floor
brush is installed
POSSIBLE REASON
- The battery may be
out of power
- The dust cup may be
full
Dust cup is full.
-
The dust cup bottom
-
may not have been
installed properly
Dust cup is full
-
POSSIBLE SOLUTION
- Check the battery for
power or change the
battery
Empty dust cup
-
(see page 7)
Connect the charger
-
Empty dust cup
-
Check to see if the dust
-
at the bottom of the
cup lock button
Empty and clean dust
-
cup container
32