ClassicFlame 34HF601GRA Manuel D'instruction page 6

IMPORTANT INFORMATION
22. Always plug heaters directly into a wall outlet/ receptacle. Never use with an extension cord or
relocatable power tap (outlet/ power strip).
23. See directions in Figure 1. This heater is for use on 120 volts. The cord has a plug as shown in figure
1. See Figure 1 for grounding instruction. An adapter as shown at C is available for connecting three-
blade grounding type plugs to two-slot receptacles. The green grounding plug extending from the
adapter must be connected to a permanent ground such as a properly gounnded outlet box. The
adapter should not be used if a three-slot grounded receptacle is available.
Grounding Pin
Adapter
Grounding
Means
Cover Of Grounded
Outlet Box
Metal
Screws
A B
C D
Grounding
Pin
Fig. 1
SAVE THESE
INSTRUCTIONS
5