Triangle SECRET EXT Mode D'emploi page 17

EN
3. Plugging the speakers
Strip the cable, then connect it to the spring terminal. Ensure that the speaker connexion polarity is
correct: the cable of the positive terminal on the amplifier must be connected to the red terminal of
the speaker, the cable of the negative terminal must be connected to the black terminal.
In order to ensure the seal of the product, make sure you use the cable channel provided or the
isolating rubber washer depending on which type of cable you use (the cable channel is intended
for a round sheath).
4. Completing the installation
Once the speaker is connected, turn it towards the listening area before tightening the mounting
knobs.
Vertical mounting Horizontal mounting
17