Onkyo CS-N575D Mode D'emploi page 39

> Before Start > Part Names
This can be set only when "Wi-Fi" is selected in "Connection Type".
∫ DHCP
"On" (Default Value): Auto configuration by DHCP
"Off": Manual configuration without DHCP
If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS
Server" manually.
∫ IP Address
Displays/Sets the IP address.
∫ Subnet Mask
Displays/Sets the subnet mask.
∫ Gateway
Displays/Sets the gateway.
∫ DNS Server
Displays/Sets the primary DNS server.
∫ Proxy URL
Displays/Sets the proxy server URL.
∫ Proxy Port
Displays/Sets the proxy server port number when you enter "Proxy URL".
∫ Friendly Name
Change the device name for this unit which is shown on other devices connected to
the network to an easily recognized name. You can input up to 31 characters. For
details on how to enter text, refer to "Entering text" (
∫ Network Check
You can check the network connection.
> Install > Initial Setup
Option
∫ Power Management
P36)
∫ Language
Select the language displayed on the display.
(CS-N575D) English (Default Value), German, French, Spanish, Italian, Dutch,
Swedish, Russian, Chinese
(CS-N575) English (Default Value), French
> Playback
Supplementary information |
Auto Standby This setting places the unit on standby automatically after
20 minutes of inactivity without any audio input.
"On": The unit will automatically enter standby mode.
"Off": The unit will not automatically enter standby mode.
0 Default values vary depending on the regions.
Network Standby When this feature is turned "On", you can turn on the power of
the unit via the network using an application that can control
this unit.
0 If "On" (default setting) is selected, power consumption
during standby becomes larger than normal.
0 When the connection to the network is lost, "Network
Standby" may be disabled to reduce power
consumption.
Bluetooth Wakeup / This function wakes up the unit on standby by connecting a
Clock Call BLUETOOTH wireless technology enabled device. Also, if
DISPLAY on the main unit or
pressed while this unit is on standby, the current time is
displayed.
"On": When this function is to be used
"Off" (Default Value): When this function is not to be used
0 Setting to "On" increases the power consumption even
when the unit is on standby.
0 This setting is fixed to "Off" if "Bluetooth" - "Auto Input
Change" is set to "Off".
Advanced Setup | Others
on the remote controller is
39
En