Bluetooth Function; Using The Alarm - Onkyo CS-N575D Mode D'emploi

> Before Start > Part Names
names, needs to be recognized on the server for
distribution to this unit, so this depends on the
specifications of the NAS or server you are using.
0 The file formats supported depend on the NAS or
server software. For details, contact the
manufacturer of NAS or the server software.
Album art in Music Server is displayed sometimes
but not other times
0 Music Server depends on the specifications of the
server software.
0 The formats supported depend on the server
software.
0 For details, contact the manufacturer of the server
software.

∫ BLUETOOTH function

0 Try plugging/unplugging the power of the unit and try
turning on/off the BLUETOOTH wireless technology
enabled device. Restarting the BLUETOOTH
wireless technology enabled device may be
effective.
0 The BLUETOOTH wireless technology enabled
devices must support the A2DP profile.
0 Near components such as microwave oven or
cordless phone, which use the radio wave in the
2.4 GHz range, a radio wave interference may
occur, which disables the use of this unit.
0 If there is a metallic object near the unit,
BLUETOOTH connection may not be possible as the
metal can effect on the radio waves.
0 In order to respond to operations on the remote
controller of this unit, the BLUETOOTH wireless
technology enabled device must support the AVRCP
profile.
0 Note that operation with the remote controller is not
46
> Install > Initial Setup
always guaranteed with all BLUETOOTH wireless
technology enabled devices.
Cannot connect with this unit
0 Check that the BLUETOOTH function of the
BLUETOOTH wireless technology enabled device is
enabled.
0 If an already paired unit cannot be connected, delete
the pairing information on the BLUETOOTH wireless
technology enabled device, then pair again.
Music playback is unavailable on the unit even
after successful BLUETOOTH connection
0 When the audio volume of your BLUETOOTH
wireless technology enabled device is set low, the
playback of audio may be unavailable. Turn up the
volume on the BLUETOOTH wireless technology
enabled device.
0 Some BLUETOOTH wireless technology enabled
devices may be equipped with a Send/Receive
selector switch. Select Send mode.
Sound is interrupted
0 There may be a problem with the BLUETOOTH
wireless technology enabled device. Check the
information on the internet.

∫ Using the alarm

0 When building a FireConnect group, the alarm does
not work.
> Playback
Supplementary information | Advanced Setup | Others