Time Settings; Playback - Onkyo CS-N575D Mode D'emploi

> Before Start > Part Names

Time settings

1
2
> Install > Initial Setup
By setting the time, you can use the alarm to start play (
1. Press
2. Press 3/4 to select "Timer", then press ENTER.
3. Use 3/4 to select "Clock" and press ENTER.
4. Set the day of the week with 3/4, then press ENTER.
5. In the next screen, use 3/4 to select either "24H" (24-hour display) or "12H" (12-
6. In the next screen, set the time with 3/4, then press ENTER.
7. In the next screen, set the minutes with 3/4, then press ENTER. Setting ends
> Playback
Supplementary information | Advanced Setup | Others
on the remote controller to display the menu.
Clock
Sun
hour display) and press ENTER.
automatically after a short time.
P34).
Asb
0 : 45
En
15